Matterport Capture Training

Tag: scanner

  • Check For Pro 3 Firmware Updates

    Connect to Pro 3 to iPad Open Matterport App Settings – bottom left of iPad Firmware – update

  • Check For Updates

    ,

    Log iPad into to your buildings Wi-Fi: iPad – General – Software Update Check and update if required Matterport Capture App Go to App Store Choose your icon/image top right Scroll to Matterport App Update if required

  • Enabling Features

    ,

    There is a range of settings available. The ability to blur faces automatically must be set in Features before the model is uploaded for processing. All other features can be enabled or disabled after the model is uploaded for processing.

  • Before Take-Off

    ,

    Before you start capture: Download the Matterport Capture App Update iPad software Update Camera Firmware Purchase Matterport Subscription Minimum Professional Switch on camera Use Wi-Fi to connect the iPad to the camera Open Capture App Add model

  • How the Pro 3 Works

    ,

    Introduction First: the camera takes a still photograph Second: the unit starts to rotate one quarter turn. The LiDAR unit mirror spins as the laser measurements are taken. This is repeated four times. It takes c.18 seconds to complete the four quadrants which comprise one full rotation. LiDAR on the Matterport Pro3 – An Accessible…

error: Content is protected !!